For users on fibre you can set port priority using swconfig
swconfig dev rtl8366rb port 1 set priority 1To check
swconfig dev rtl8366rb port 1 get priorityTo get it to run persistently on boot
echo 'swconfig dev rtl8366rb port 1 set priority 1' >> rc.local
This will only work on patched rtl8366rb drivers.
For unpatch openwrt firmware you have to use vconfig.
Updated to R37083
Attitude Adjustment with full ipv6 support including LuCI.
Downgrade the dhcpmasq to a non ipv6 version as the function is already added into the default Attitude Adjustment.
Review all the LuCI options and fix them, expose more wifi options.
This release is really a good one!.
For WR1043ND
"-Os -pipe -march=24kc -mno-mips16 -mgp32 -fno-caller-saves -mno-branch-likely -mplt -msym32"I also patched lighttpd to use
server.network-backend = "linux-sendfile"
server.event-handler = "linux-sysepoll"
This is done by patching the Makefile to enable linux-sendfile function which I do not know why it was disabled in OpenWRT's lighttpd Makefile.
I did it by #undef sendfile_broken and #define have_send_file
I managed to add the repo to github
OpenWRT TL-WDR4300
OpenWRT TL-WR1043ND
For my jperf (iperf +java frontend) I recorded increase in NAT speeds for both Routers but I would like those with highspeed internet to give me feedbacks.
Reminder: setting Wireless Region to 'US ' unlocks all "Wireless Goodness"
You can check updates on OpenWRT side using their development site.
Cheers!
Update:
Updates refreshed.
Removed Atheros Options since they are actually not support from documentation.
Integrate Jumbo Switch and Storm Filter since there are no issues.
Attitude Adjustment is Tagged and released!
I have also released a Beta version with Jumbo Frames and Storm Filtering
ssh into the router and use
swconfig dev rtl8366rb show (to display switch setting)
swconfig dev rtl8366rb set max_length 3
swconfig dev rtl8366rb set apply (apply the settings)
The rest you can figure out on your own using help option.
Note that the Jumbo Frame is a switch only option reason is that the AR9132 SoC DOES NOT SUPPORT JUMBO FRAME only the switch RTL8366RB do.
I have just release another update, changes are as follows:
-Rename some of the stuff in LuCI
-Removal of excess packages(torrents etc) now 1.8 MB left for you to install the stuff you want
- There is a lot of feedback from people who want to install specific packages for their own needs so the best way is to give them space to do that.
-Update certain packages
-Rename PnP and uShare modules device information
-Remove pure-ftpd and added vsftpd with TLS
(managed to compile successfully and tested it)
- vsftpd with TLS does encrypted FTP using less flash and less RAM
OpenWRT Attitude Adjustment Release For TL-WDR4300
LAN to WAN Wired Benchmark Software Routing
OpenWRT Attitude Adjustment Release for TL-WR1043ND
LAN to WAN Wired Benchmark Software Routing
With L7-Protocol and QoS (Default Configuration)
With L7-Protocol and QoS Service Stopped MSS disabled
Wireless LAN to WAN (2M Line of Sight)
With L7-Protocol and QoS Service Stopped MSS disabled
Using AES WPA2-PSK encryption 40MHZ Fat Channel, noscan enabled dtim_period=1
Basically what you can expect on Wireless.
Note: Results may vary due to interference of surrounding networks
Factory for upgrading from TP-LINK stock firmware to OpenWRT firmware
Sysupgrade for upgrading from older OpenWRT version to newer OpenWRT version
0 comments:
Post a Comment